1. Break out wedge strip from the top bar & retain. Then slot side bars into the top bar as shown, with the groove on the inside. Nail the top bar into the side bars to secure.

2. Place first bottom rail in position at the bottom of the frame and nail in place as shown. Keep the other bottom bar to one side for now.

3. Bend the wire loops on your foundation at right angles. Then carefully slide wax insert into the side grooves on your frame until the wire loops rest on the top bar.

4. Press wedge strip (from step 1) between side rails, down onto wire loops as shown, and nail into the rear of the top bar with 3 x pins. Fit the second bottom rail and nail into place as shown - your frame is complete!